Brass Mesh Manufacturers

PARSH NATH MANUFACTURERS PVT LTD makes woven brass mesh in-house in Delhi under the SNAKE® Brand. It is made from Low Brass wire, an alloy of 80% copper and 20% zinc, in counts from 2 mesh to 100 mesh, and the standard specifications are available from stock for prompt delivery.

Use this page to understand where brass mesh fits, how to pick a mesh count, and what to tell us when you order.

Brass mesh, or brass wire cloth, is made by weaving brass wire into an even grid. The wire diameter and the spacing decide how fine or coarse the cloth is. It is used for filtering, sieving and screening, and also for decorative and architectural work.

Low Brass resists corrosion and has higher tensile strength than pure copper, while staying easy to form. It is non-magnetic, non-sparking and has natural antimicrobial properties. Compared with bronze, which is harder and better in marine or highly acidic conditions, brass reaches comparable corrosion resistance at a lower price in many applications.

Coarse cloth for screening. A 2 mesh cloth has an opening of 11.10 mm and an open area of 76.2%, and a 10 mesh cloth has a 1.90 mm opening.

Medium cloth for sieving and general filtering. Counts such as 20 to 40 mesh give much finer openings while still passing a good flow.

Fine cloth for precision filtration. A 100 mesh cloth has a 0.15 mm opening with 0.11 mm wire. As the count goes up the openings shrink and the open area falls, so choose the finest cloth your flow can tolerate.

Industrial filtration, sieving and screening, chemical and petrochemical processing, food and beverage processing, pharmaceutical screening, water treatment plants, laboratory sieves, oil and gas filtration, mining and quarrying, electromagnetic shielding, and decorative or architectural use.

Our standard brass specifications are normally ready from stock. Many other specifications can be woven to your requirement, though a substantial minimum order applies for non-stock sizes. For pure copper cloth, see our copper woven wire page, and for the full brass range, our brass woven wire cloth page.

Send us the mesh count, wire diameter, roll width and quantity. Our office is at 162, Pushpanjali, Delhi – 110092, and our godown is at Pushta Road, Karawal Nagar, Delhi – 110094. We are available Monday to Saturday, 9.00am to 8.00pm.

What is your brass mesh made of?

Low Brass wire, an alloy of 80% copper and 20% zinc.

Which mesh counts are available from stock?

Standard counts from 2 mesh to 100 mesh are normally available from stock for prompt delivery.

Is brass better than bronze?

Brass has higher tensile strength than copper and is more economical than bronze. Bronze is harder and is preferred in highly acidic or marine conditions.

Can you make a custom specification?

Yes, though a substantial minimum order applies for specifications not kept in stock.